RDX AWD L4-2.3L Turbo (2010)
21. Secure the harnesses with the harness wire tie (C).
22. Install the shift lock release and shift lock release spring.
23. Install the A/T gear position indicator panel/shift lever boot assembly.
24. Install the indicator panel light in the A/T gear position indicator panel.
25. Install the shift lever knob cover over the shift lever boot ring.
26. Install the shift lever knob, and secure the shift lever knob with new screws.
27. Install the shift lever button ring.
28. Install the shift lever See: Removal and Replacement/A/T Shift Lever Installation.