RDX AWD L4-2.3L Turbo (2010)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Reassembly
Intermediate Shaft Reassembly
Exploded View
Special Tools Required
-
Oil Seal Driver, 65 mm 07JAD-PL90100
-
Oil Seal Driver Attachment 07NAD-P200100
-
Driver Handle, 15 x 135L 07749-0010000
-
Fork Seal Driver, 39.2 x 49.5 x 15 mm 07947-4630100
NOTE: Refer to the Exploded View, as needed, during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air.
NOTE: Do not wash the rubber parts with solvent.
2. Press a new intermediate shaft bearing (A) into the bearing support (B) using the oil seal driver attachment (C), the 15 x 135L driver handle (D),
and a press.