RDX AWD L4-2.3L Turbo (2010)
3. Install the internal snap ring (A) in the groove (B) of the bearing support.
4. Press the intermediate shaft (A) into the shaft bearing (B) using the 39.2 x 49.5 x 15 mm fork seal driver (C) and a press.
3. Install the internal snap ring (A) in the groove (B) of the bearing support.
4. Press the intermediate shaft (A) into the shaft bearing (B) using the 39.2 x 49.5 x 15 mm fork seal driver (C) and a press.