RDX AWD L4-2.3L Turbo (2010)
6. Install the secondary HO2S (SENSOR 2) in the exhaust pipe See: Powertrain Management/Computers and Control Systems/Oxygen
Sensor/Service and Repair/Secondary HO2S Replacement.
7. Install the right front driveshaft See: Front Driveshaft Installation.
8. Refill the transmission with the recommended transmission fluid See: Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/ATF Replacement.
9. Check the wheel alignment, and adjust it if necessary See: Maintenance/Alignment/Service and Repair.
10. Test-drive the vehicle.