RL V6-3.5L (2007)
The HFL system may experience a number recognition issue, such as when a customer rattles off a set of numbers in a group unrecognized by the
system. The HFL system understands phone numbers in specific blocks of 1, 3, 4, 7, and 10 numbers. For example, the system understands:
1234567890
123-456-7890
1-2-3-4-5-6-7-8-9-0
The system may become confused if numbers are stated in other blocks like these:
1234-567-890
12-34-56-78-90
12345-67890
123-4567-890
Navigating Through Menus
To skip a voice prompt, press and release the HFL TALK button while the HFL system is speaking. The system begins listening for your next voice
command.
To go back a step in a voice command sequence, press and release the HFL BACK button, or press the HFL TALK button and say Go back." If you
don~ say anything while the HFL system is listening for your voice command, it times out and stops voice recognition. The next time you press and
release the HFL TALK button, the HFL system begins listening from the point it timed out.
If you've finished or want to stop a voice command sequence at any time, press and release the HFL BACK button, or press and release the HFL
TALK button, wait for the beep, and say Cancel." The next time you press and release the HFL TALK button, the HFL system begins from its main
menu, and MAIN appears on the multi-information display (MID) in the instrument panel. To avoid keeping the audio system muted, press and release
the HFL BACK button when you are finished.
Pairing a Cell Phone
You must pair an approved Bluetooth-compatible phone to the HFL system before you can make and receive calls. For a current list of approved
phones and specific phone pairing instructions for each phone, see Checking Cell Phone Compatibility, go to www.acura.com/handsfreelink, or call
(888) 528-7876.
The following procedure works for most phones. If you cannot pair your phone to the HFL system with this procedure, refer to your phone's operating
manual, visit www.acura.com/handsfreelink, or call (888) 528-7876.
NOTE:
^
You cannot pair a phone while the vehicle is moving.
^
Your phone must be in its Discovery mode.
^
A maximum of six Bluetooth-compatible phones can be paired to the system.
1. With your phone on and the ignition switch in ACCESSORY (I) or ON (II), press and release the HFL TALK button. After the beep, say Phone
setup." The HFL responds, Phone setup options are status, pair, edit, delete, and list."
2. Press and release the HFL TALK button. After the beep, say "Pair." The HFL responds, "The pairing process requires operation of your mobile
phone. For safety, only perform this function while the vehicle is stopped. State a four-digit code for pairing. Note this code. It will be requested
by the phone."
3. Press and release the HFL TALK button. After the beep, say the four-digit code you want to use. For example, say 1, 2, 3, 4. "The HFL responds,
1, 2, 3, 4. Is this correct?"
4. Press and release the TALK button. After the beep, say Yes. "The HFL responds, HFL is now searching for a Bluetooth phone. Make sure the
phone you are trying to pair is in Discovery mode."
If these steps do not work on the phone you are pairing, refer to the phone's operating manual.
