acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Trim Removal/Installation - Door Areas|Page 10043 > < Trim Removal/Installation - Door Areas|Page 10041
Page 3
background image

7. If the side curtain airbag has riot been deployed, check the A-pillar trim (A):

-

To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the A-pillar trim and replace it if it has any
of these types of damage:
-

Any cracks, deformations or stress-whitenings

-

Any cracks or stress-whitening in the clip and pin seating surfaces (B)

-

Damaged top of the upper clip pin (C)

-

Replace the upper clip with a new one because it was damaged during removal.

-

Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.

8. Before installing the A-pillar trim (A), carefully remove the grommet (B) from the pin (C) on the new upper clip.
9. Check the overlap between the headliner and A-pillar trim, and if necessary, adjust it.

10. Carefully reinstall the grommet (A) on the pin (B) and seat them on the A-pillar trim (C) as shown.
11. Reinstall the A-pillar trim (A).

Trim Removal/Installation - Door Areas|Page 10043 > < Trim Removal/Installation - Door Areas|Page 10041