acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Trim Removal/Installation - Door Areas|Page 10050 > < Trim Removal/Installation - Door Areas|Page 10048
Page 10
background image

NOTE:  The upper clip must be replaced with a new one because the grommet is damaged during removed.

7. If the side curtain airbag has been deployed, replace the C-pillar trim with a new one.

8. If the side curtain airbag has not been deployed, check the C-pillar trim (A):

-

To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect the C-pillar trim and replace it if it has any
of these types of damage:
-

Any cracks, deformations, or stress-whitenings

-

Any cracks or stress-whitening in the clip and pin seating surfaces (B)

-

Damaged top of the upper clip pin (C)

-

Replace the upper clip with a new one because it was damaged during removed.

-

Check if the clips (D) are damaged or stress-whitened, and if necessary, replace them with new ones.

9. Before installing the C-pillar trim (A), carefully remove the grommet (B) from the pin (C) on the new upper clip.

10. Check the overlap between the headliner and C-pillar trim, and if necessary, adjust it.

Trim Removal/Installation - Door Areas|Page 10050 > < Trim Removal/Installation - Door Areas|Page 10048