RL V6-3.5L (2007)
11. Carefully reinstall the grommet (A) on the pin (B) and seat them on the C-pillar trim (C) as shown.
12. Place the C-pillar trim (A) over the C-pillar (B), and fit its upper clip (C) and the other clips (D, E) into holes (F) in the C-pillar, then lightly push
the trim into place.
NOTE:
-
Make sure the side curtain airbag isn't tucked down under the clips.
-
Push lightly on the upper clip. If you push too hard, the clip will be damaged, and it will not hold the trim properly.