RL V6-3.5L (2007)
12. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the seat-back cover.
13. Install the cover in the reverse order of removal, and note these items:
-
Reinitialize the OPDS control unit.
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the clips, hooks,
and hook strips.
-
Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).
-
Reinstall the front hook (C) and rear hook (D) of the reinforcing cloth (E) securely.
-
Use only original Acura replacement seat-back covers.
-
Make sure the recline motor harness, side airbag harness, seat-back heater harness, and OPDS unit harness (passenger's seat) are routed
properly.