RL V6-3.5L (2007)
Seat Cover: Service and Repair
Front Seat Cushion Cover
Front Seat Cushion Cover Replacement
Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
-
Take care not to tear the seams or damage the seat covers.
-
Put on gloves to protect your hands.
1. Remove the front seat.
2. From under the seat cushion, detach the recline motor connector clip, the side airbag connector clip and the seat heater connector clip. Release the
seat cushion cover from the seat cushion frame spring, then pull the cover back, and remove the clamps.
3. Remove the seat-back.
4. Release the hook strips (A) from both sides of the seat cushion.
