acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Front Seat Belt|Page 8928 > < Seat Belt|Testing and Inspection|Page 8925
Page 1
background image

Seat Belt: Service and Repair
Front Seat Belt

Front Seat Belt Replacement

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.

NOTE:  Check the front seat belts for damage, and replace them if necessary.

Front Seat Belt

1. Make sure you have the anti-theft codes for the audio and navigation systems, then write down the audio presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.

3. Slide the front seat forward fully, and remove the anchor cover (A).

4. Remove the lower anchor bolt (A).
5. Remove the B-pillar lower trim.
6. Remove the B-pillar upper trim and slider.

7. Remove the upper anchor bolt (A).

Front Seat Belt|Page 8928 > < Seat Belt|Testing and Inspection|Page 8925