RL V6-3.5L (2007)
8. Disconnect the seat belt tensioner connector (A), seat belt tensioner reducer connector (B), and seat belt motor connector (C) (some models).
Remove the upper retractor mounting bolt (D) and the lower retractor bolt (E), then remove the front seat belt (F) and retractor (G).
9. If necessary, remove the front seat belt protector (H).
10. Remove the shoulder anchor adjuster (A).
11. Install the seat belt in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Check that the retractor locking mechanism functions as described.
-
Assemble the washer and bushing on the upper anchor bolt as shown.
-
If the seat belt tensioner has been deployed, replace the front seat belt protector with a new one.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the seat belt.
-
Make sure the seat belt tensioner and tension reducer connectors are properly plugged in.
