RL V6-3.5L (2007)
-
Reconnect the negative cable to the battery.
-
Check for any DTCs, and clear them using the HDS. If the DTCs will not clear, do the necessary troubleshooting.
-
Enter the anti-theft codes for the audio and navigation systems, then enter the customer's audio presets.
-
Reset the power window control unit.
-
Do the steering column position memorization.
Seat Belt Buckle
1. Make sure you have the anti-theft codes for the audio and navigation systems, and then write down the audio presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Remove the front seat.
4. Release the hook (A) of the seat cushion cover, then detach the harness clip (B).
