RL V6-3.5L (2007)
14. Measure the brush length (A). If it is shorter than the service limit, replace the brush holder assembly.
Starter Brush Holder Test
15. Check for continuity between the (+) brush (A) and (-) brush (B). If there is continuity, replace the brush holder assembly.
Planetary Gear Inspection
16. Check the planetary gears (A) and ring gear (B) Replace them if they are worn or damaged.
Overrunning Clutch Inspection
17. Slide the overrunning clutch along the shaft. Replace it if it does not slide smoothly.
