RL V6-3.5L (2007)
4. Loosely install the damper pinch bolt (D) into the damper fork.
5. Install the flange bolt (E) to the damper fork and lower arm, then lightly tighten the new damper fork mounting nut (F).
NOTE: Use a new damper fork mounting nut on reassembly.
6. Install the lower arm side stabilizer link.
7. Place the floor jack under the lower arm, and raise the suspension to load it with the vehicle's weight.
8. Tighten the flange nuts on the top of the damper to the specified torque values.
9. Tighten the damper pinch bolt and the flange nut on the damper fork to the specified torque value.
10. Clean the mating surfaces of the brake disc and the inside of the wheel, then install the front wheel.
11. Install the engine compartment covers.
