RL V6-3.5L (2007)
Suspension Spring ( Coil / Leaf ): Removal and Replacement
Rear Suspension
Spring Replacement
Spring
Special Tools Required
Ball joint remover, 32 mm 07MAC-SL0A102
Removal
1. Raise the rear of the vehicle, and support it with safety stands in the proper locations.
2. Remove the rear wheel.
3. Remove the self-locking nut (A) and the washer (C) while holding the joint pin (D) with hex wrench (E), and disconnect the stabilizer link (F)
from lower arm B.