RL V6-3.7L (2009)
Front Door Panel: Service and Repair
Front Door Pull Pocket Bracket Replacement
Front Door Pull Pocket Bracket Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove the door panel. See: Front Door Panel Removal/Installation
3. Remove the cap (A) and remove the plastic cover (B) as needed.
4. Loose the bolts (A), then remove the door pull pocket bracket (B) upward and push out.
5. Install the bracket in the reverse order of removal, and note these items:
-
Replace any damaged parts with new ones.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.