RL V6-3.7L (2009)
12. Install the door panel in the reverse order of removal, and note these items:
-
Replace any damaged cable fasteners with new ones.
-
Make sure the connectors are plugged in properly, and the cable is connected properly.
-
When reinstalling the door panel, make sure the plastic cover is installed properly and sealed around its outside perimeter to seal out water.
-
If you replace the latch cable (A), attach the cable to the cable fastener (B) with the latch in lock position as shown.
-
Make sure the window, the power door lock, the trunk lid, and the fuel fill door operate properly.
