RL V6-3.7L (2009)
8. Remove the cable fastener (A) from the inner handle (B), and then disconnect the lock cable (C) from the joint bushing (D). Disconnect the inner
handle cable (E) from the joint bushing (F), then remove the inner handle.
NOTE: If the cable fasteners are damaged or stress-whitened, replace them with new ones.
9. Disconnect the power window switch connector (A) and the seat position memory switch connector (B).
10. Remove the screws, then remove the grip/armrest (A) and the wood trim (B) from the door panel (C).
11. Remove the screws (A, B), then separate the door grip (C), the armrest (D), the power window switch panel (E), the grip bracket (F), the pull
pocket (G) and the power window switch (H).
