RL V6-3.7L (2009)
Trunk / Liftgate Handle: Service and Repair
Trunk Lid Outer Handle Switch Test/Replacement
1. Open the trunk lid, and remove the trunk lid trim. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Interior Trim Removal/Installation
- Trunk Lid
2. Disconnect the 3P connector (A) from the trunk lid outer handle switch (B).
3. Check for continuity between terminals No. 2 and No. 3.
-
With the handle pulled, there should be continuity.
-
With the handle released, there should be no continuity.
4. If the continuity is not as specified, remove the two bolts and replace the switch.