RL V6-3.7L (2009)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Interior Trim Removal/Installation - Trunk Area
Interior Trim Removal/Installation - Trunk Area
Special Tools Required
-
KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to bend or scratch the trim and the panels.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Remove the spare tire lid (A) and the spare tire spacer (B).
2. Detach the clips, and release the hooks (A) by pulling the trunk rear trim panel (B) up, then remove it.
3. Release the clips (A, B) and the fasteners (C), then remove the trunk front trim panel (D).
