RL V6-3.7L (2009)
3. Pull the top of the A-pillar trim (A) back by hand to remove the pin (B) from the grommet (C) which remains in the body (D).
4. Remove the A-pillar trim (A) by hand to detach the remaining clips, then pull the trim up from the dashboard (B).
5. Remove the grommet from the body.
NOTE: The upper clip grommet must be replaced with a new one because the grommet is damaged during removal, and should not be reused.
6. If the side curtain airbag has been deployed, replace the A-pillar trim with a new one.
7. If the side curtain airbag has not been deployed, check the A-pillar trim (A):
