RL V6-3.7L (2009)
3. Hit the upper clip with a rubber mallet. The clip is under the "SIDE CURTAIN AIRBAG" mark (A) near the top of the C-pillar trim (B). Hitting
the clip breaks the shoulder (C) on the grommet (D) and pushes the pin (E) into the grommet on the body (F).
NOTE: The clip must be replaced with a new one when the C-pillar trim is reinstalled.
4. Pull the top of the C-pillar trim (A) back by hand to remove the pin (B) from the grommet (C) which remains in the body hole (D).