RL V6-3.7L (2009)
12. Install the gear (A) with its chamfered side faced the seat frame.
13. Install the rear brake bracket (A) without the rear brake to the seat frame. Using TORX T40 and T30 bits, lightly fasten all of the mounting bolts
(B, C)
14. Carefully position the seat frame on its rear up-down motor side down.
15. Align the pinion (A) on the rear brake (B).
-1 Engage the gear (C) with the motor pinion by hand, and center it.
-2 Check the positions of the sector gear (D) and the cross-shaped hole (E) in the gear.
-3 Using a 8 mm hexagonal wrench, align the pinion on the rear brake with the sector gear, and align the fingers (F) around the axle with the
cross-shaped hole in the gear.
