RL V6-3.7L (2009)
Splash Guard: Service and Repair
Splash Shield Replacement
Special Tools Required
-
Push pin puller 07AAC-SJAA100
NOTE: Take care not to scratch the body.
1. Remove the splash shield (A).
-1 Remove the clips (B, C) that secure the front inner fender (D) and the splash shield to the body.
-2 From under the front bumper (E), remove the bolts (F) (with engine undercover).
-3 From under the body, remove the bolts (G) and the clips (H, I).
-4 Release the hooks (J) of the splash shield, then pull the splash shield out.
2. Install the splash shield in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips into place securely.