RL V6-3.7L (2009)
8. Disconnect the connectors (A) from the adaptive front lighting control unit, the electronically controlled power steering control unit, and the
daytime running lights control unit. Remove the relay (B), the bolt, and the self-tapping screws, then remove the bracket (C).
9. Disconnect the connectors (A) from the driver's cool vent control motor, the driver's air mix control motor, the mode control motor, and the
evaporator temperature sensor, then remove the wire harness clips (B).
10. Disconnect the connectors (A) from the blower motor, the power transistor, the control motor relay, the throttle actuator control module
subharness, and the dashboard wire harnesses. Remove the self-tapping screw (B), the connector clip (C) and the wire harness clips (D).
