RL V6-3.7L (2009)
Air Bag: Removal and Replacement
Side Curtain Airbag Replacement
Side Curtain Airbag Replacement
Removal
NOTE:
-
Review the interior trim replacement procedure in the body section before doing repair or service. See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Pillar Trim/Interior Trim Removal/Installation - A-Pillar Trim
-
Removal of the side curtain airbag must be done according to Precautions and Procedures. See: Air Bag(s) Arming and Disarming/Service and
Repair
-
The side curtain airbag system consists of many components. When the side curtain airbag has been deployed, go to Component
Replacement/Inspection After Deployment, See: Service and Repair and replace all of the parts listed.
1. Do the battery terminal disconnection procedure, See: Starting and Charging/Battery/Service and Repair/Procedures then wait at least 3 minutes
before starting work.
2. Remove the headliner. See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair
3. Remove the AM/FM main antenna amplifier and the AM/FM subantenna amplifier. See: Accessories and Optional Equipment/Antenna/Antenna
Amplifier/Service and Repair
4. Disconnect the left or right side wire harness 2P connector (A) from the side curtain airbag.
5. Remove the mounting bolts (A) from the bracket.
