RL V6-3.7L (2009)
2. Connect the left or right side wire harness 2P connector (A) to the side curtain airbag.
3. Do the battery terminal reconnection procedure. See: Starting and Charging/Battery/Service and Repair/Procedures
4. Connect the HDS, and clear the DTCs. See: Testing and Inspection/Initial Inspection and Diagnostic Overview
5. After installing the side curtain airbag, confirm proper system operation: Turn the ignition switch to ON (II); the SRS indicator should come on for
about 6 seconds and then go off.
6. Install all removed parts.
7. Confirm proper headliner/pillar trim overlap. See: Service and Repair