RL V6-3.7L (2009)
Seat Belt: Service and Repair
Front Seat Belt Replacement
Front Seat Belt Replacement
SRS components are located in this area. Review the SRS component locations, See: Air Bag Systems/Locations and the precautions and procedures
See: Air Bag(s) Arming and Disarming/Service and Repair before doing repairs or service.
NOTE: Check the front seat belts for damage, See: Testing and Inspection and replace them if necessary.
Front Seat Belt
1. Do the battery terminal disconnection procedure, See: Starting and Charging/Battery/Service and Repair/Procedures and wait at least 3 minutes
before beginning work.
2. Slide the front seat forward fully, and remove the anchor cover (A).
3. Remove the lower anchor bolt (A).
4. Remove the B-pillar lower trim. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - B-Pillar Lower Trim
5. Remove the B-pillar upper trim and slider. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Interior Trim
Removal/Installation - B-Pillar Upper Trim
6. Remove the upper anchor bolt (A).
