RSX L4-2.0L (2005)
Fuel Door Release Lever: Service and Repair
Fuel Fill Door Opener Replacement
NOTE: Put on gloves to protect your hands.
1. Slide the driver's front seat rearward fully.
2. Remove these items from the left side of the vehicle :
-
Door sill trim
-
Kick panel
3. Pull the carpet back as necessary.
4. Remove the bolts, then remove the fuel fill door opener (A) from the body.
5. Disconnect the fuel fill door opener cable (B) from the opener, then remove the opener. Take care not to kink the cable.
6. Install the opener in the reverse order of removal, and note these items:
-
Make sure the opener cable is connected properly.
-
Make sure the fuel fill door opens properly and locks securely.
