RSX L4-2.0L (2005)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
For Some Models
1. Disconnect the windshield washer tubes (A), and release the tube from the clip (B) and the hooks (C).
2. Using a clip remover, detach the clips (A, B). Release the hooks (C), then remove the hood insulator (D). Take care not to scratch the hood.
3. Install the insulator in the reverse order of removal, and note these items:
-
Replace any damaged or stress-whitened clips.
-
Push the clips into place securely.
-
Make sure the windshield washer tubes are connected properly.