RSX L4-2.0L (2005)
10. Install the headliner in the reverse order of removal, and note these items:
-
When reinstalling the headliner through the hatch opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
-
Using a clip remover, detach the remaining clips from the body, and replace any damaged or stress-whitenings clips . Before reinstalling the
roof side pad and headliner, install the clips on the pad and headliner, and fit the clips into the holes in the body, then push on the pad or
headliner until the clips snap into place.
-
If the threads on a visor screw are worn out, use an oversized self-tapping ET screw (P/N 90137-S30-003) made specifically for this
application.
-
Check that both sides of the headliner are securely attached to the trim.
-
With moonroof: When reinstalling the roof trim (A), install the joint (B) as shown.
