RSX L4-2.0L (2005)
5. Detach the hooks (A), then remove the front headrest trim (B) and rear headrest trim (C). For 02-04 models: Pull back the seat-back cover (D).
6. 05-06 models: Release the hooks (A), and release the seat-back cover (B) from the wire loop (C) on the seat-back frame. Release the fasteners (D),
and then pull back the seat-back cover.
7. Release the hook (A), and unzip the seat-back cover (B). Pull the side airbag harness (C) and the OPDS harness (D) (passenger's seat) out through
the holes (E) in the seat cushion cover. The passenger's seat is shown, the driver's seat is symmetrical except it has no OPDS harness.
