RSX L4-2.0L (2005)
Seat Belt: Service and Repair
Rear Seat Belt
Rear Seat Belt Replacement
NOTE: Check the rear seat belts for damage, and replace them if necessary.
Rear Seat Belt
1. Remove the rear side trim panel.
2. Remove the lower anchor bolt (A).
3. Remove the upper anchor cap (A), and remove the upper anchor bolt (B)
4. Remove the quarter pillar trim as necessary.
5. Remove the retractor mounting bolt (A) and the retractor bolt (B), then remove the rear seat belt (C) and retractor (D).
