RSX L4-2.0L (2005)
5. Detach the seat belt switch connector clip (A) and seat belt buckle tensioner connector clip (B), and on the passenger's seat with BOSE sound
system, disconnect the subharness connector (C) from the seat belt switch connector. Remove the harness band (D) from the seat cushion frame
spring (E). The driver's seat and passenger's seat with BOSE sound system are shown, the passenger's seat without BOSE sound system is similar
to the driver's seat.
6. Remove the center anchor bolt (A), and remove the seat belt buckle (B)
NOTE: The passenger's seat is shown, the driver's seat is similar.
7. Pull the seat belt switch/tensioner harness (C) out through the hole in the seat track, and remove the seat belt buckle from the retainer band (D)
(passenger's seat)
8. Install the buckle in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the center anchor bolt before reinstallation.
-
Apply liquid thread lock to the seat mounting bolts before reinstallation,
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft code for the radio, and then enter the customer's radio station presets.
-
Reset the clock.
-
Do the ECM idle learn procedure and the power window control unit reset procedure.
