RSX L4-2.0L (VTEC) (2002)
/Page-2691002.png)
No - This service bulletin does not apply; continue
with normal troubleshooting.
2.
Follow the HDS screen prompts, and do the EVAP Function Test.
Did the EVAP solenoid valve pass the test?
Yes - This service bulletin does not apply; continue with normal troubleshooting.
No - Go to REPAIR PROCEDURE.
REPAIR PROCEDURE
1.
Relieve the fuel pressure:
^
Refer to page 11-361 of the 02-06 HSX Service Manual, or
^
Online, enter keywords FUEL PRESSURE, and select Fuel Pressure Relieving from the list.
2.
Drain the fuel, then remove the fuel tank:
^
Refer to page 11-377 of the service manual, or
^
Online, enter keyword TANK, and select Fuel Tank Replacement from the list.
3.
Remove the EVAP solenoid valve:
^
Remove pressure sensor tube B; it will be reused.
^
Remove fuel vent tube B; it will not be reused.
^
Disconnect fuel vent tube C from the EVAP solenoid valve. The tube will be reused.
^
Disconnect the 2P connector from the EVAP solenoid valve.
^
Remove the EVAP solenoid valve (two bolts). The bolts will be reused. The valve will not be reused.
