RSX L4-2.0L (VTEC) (2002)
4.
Attach the tubes and the joint from the kit onto the new EVAP solenoid valve as shown.
5.
Install the new EVAP solenoid valve using the original bolts.
6.
Connect the original hoses and the new tubes as shown.
7.
Reinstall the fuel tank.
8.
Reinstall the fuel tank unit with a new base gasket and a new locknut.
9.
Reinstall the fuel line to the tank with a new fuel feed retainer.
10.
Refill the tank with the fuel you removed in step 2.
Disclaimer