TL L5-2451cc 2.5L SOHC MFI (1997)
14. Remove the six bolts securing the lower valve body assembly as shown, then remove the lower valve body assembly.
15. Clean the inlet opening of the ATF stainer thoroughly with compressed air, then check that it is in good condition, and the inlet opening is not
clogged.
16. Replace the ATF strainer if it is clogged or damaged.
NOTE: The ATF strainer can be reused if it is not clogged.
INSTALLATION
NOTE:
*
Coat all parts with ATF.
*
Replace the O-rings and ATF pan gasket.
1. Shift the transmission into the P position.
2. Assemble the lower valve body assembly.
