TL V6-3.2L (2004)
3. Remove the under-hood fuse/relay box.
4. Drain the engine coolant.
5. Remove the heater hose (A), and two nuts (B) securing the fuel line.
6. Remove the timing belt.
7. Remove the rocker arm assembly.
8. Remove the rear camshaft pulley.
9. Remove the thrust cover (A), then remove the rear camshaft (B).
10. Install the rear camshaft in the reverse order of removal. Always use a new O-ring (C). Apply new engine oil to the journals and camshaft lobes.
11. Apply new engine oil to the threads of the camshaft pulley mounting bolt, then install the rear camshaft pulley.
12. Install the rocker arm assembly, then tighten the mounting bolts.
13. Install the timing bell.
14. Adjust the valve clearance.
15. Fill the radiator with engine coolant and bleed the air out.
16. Perform the crankshaft position (CKP) pattern clear/CKP pattern learn procedure.
17. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's XM radio channel presets. Set the clock.
