TL V6-3.2L (2004)
Air Door Actuator / Motor: Service and Repair
Passenger's Mode Control Motor
Passenger's Mode control Motor Replacement
1. Turn the ignition switch OFF.
2. Set the passenger's mode to VENT.
3. Remove the glove box housing.
4. Remove the throttle actuator control module.
5. Remove the climate control unit.
6. Disconnect the 10P connector (A) from the passenger's mode control motor (B). Remove the self-tapping screws and the passenger's mode control
motor from the heater unit.
7. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.