TL V6-3.2L (2004)
6. Release the hook (A) of the seat cushion cover on 4-way power seat. Remove the center anchor bolt (B), and detach the harness clip (C) on the
driver's and some passenger's seats, then remove the seat belt buckle (D).
7. Pull the seat belt switch harness (E) out through the space between the seat cushion and the seat linkage or through the hole in the seat track.
8. Install the buckle in the reverse order of removal, and note these items.
-
Assemble the washers on the center anchor bolt as shown.
-
Apply liquid thread lock to the center anchor bolt before reinstallation.
-
Tighten the bolts by hand first; then tighten to specification with a torque wrench.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the audio and navigation systems, and then enter the customer's XM radio channel presets.
-
Set the clock (without navigation system).
