TL V6-3.5L (2007)
3. Remove the brake hose mounting bolt (C), then remove the brake hose.
Installation - Rear
1. Install the brake hose (A) with the mounting bolt (B).
2. Connect the brake hose to the caliper with the banjo bolt (C) and new sealing washers (D).
3. Install a new brake hose clip (A) to the brake hose(B) on the bracket, then connect the brake line (C). Do not twist the brake hose.
4. After installing the brake hose, bleed the brake system.
5. Do the following checks:
^
Check the brake hose and line joint for leaks, and tighten if necessary.
^
Check the brake hoses for interference and twisting.
