TL V6-3.5L (2007)
2. Connect the brake line (A) to the brake hose (B) loosely.
3. Install the new brake hose clips (C) on the brake hose.
4. Tighten the 10 mm flare nut (D) to the specified torque values.
5. Do the following checks:
^
Check the brake hose and line joint for leaks.
^
Check the brake hoses for interference and twisting.
Removal - Rear
1. Disconnect the brake line (A) from the brake hose (B).
2. Remove the banjo bolt (A), and disconnect the brake hose (B) from the caliper.