TL V6-3.5L (2007)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
NOTICE
^
Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid gets on the paint, wash it off immediately with water.
^
Be careful not to damage or deform the brake lines during removal and installation.
^
To prevent the brake fluid from flowing, plug and cover the hose ends and joints with a shop towel or equivalent.
1. Lower the vehicle to the ground.
2. Remove the covers (A) in the engine compartment.
3. Remove the under-hood fuse/relay box (A), and move it aside.
4. Remove the engine wire harness clamp (A) from the strut brace.
5. Remove the accelerator pedal position (APP) sensor mounting bolt (A) from the strut brace.