TL V6-3.5L (2007)
^
Replace all the rubber parts with new ones whenever the master cylinder is removed.
^
Use a new rod seal on reassembly.
^
Coat the inner bore lip and outer circumference of the new rod seal with the Shin-Etsu silicone grease (P/N 08798-9013).
^
Install the rod seal onto the master cylinder with its grooved side (G) toward the master cylinder.
^
Check the brake pedal height and free play after installing the master cylinder, and adjust it if necessary.
14. Bleed the brake system.
15. Spin the wheels to check for brake drag.
