TL V6-3.5L (2007)
6. Install the anchor in the reverse order of removal, and note these items:
-
Assemble the washers, collar, and bushing on the lower anchor bolt as shown.
-
Tighten the bolts by hand first, then tighten to specification with a torque wrench.
-
Make sure the seat belt buckle switch connector is plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the audio and the navigation system (if equipped), then enter the audio presets.
-
Set the clock (without navigation system).