TL V6-3.5L (2007)
18. Install the clutch line (D), then install the new retaining clip (E). Connect the reservoir hose (F).
19. To prevent the retaining clip (A) from coming off, pry apart the tip of the retaining clip (B) with a screwdriver.
20. Install the clutch master cylinder (A).
21. Install the clutch line to the clamps (B).
22. Connect the clutch line (C) to the bracket (D).
23. Install the reservoir mounting bolt (E).
24. Make sure the hose clamps (A) are positioned on the master cylinder (B) and reservoir (C) as shown.
