TL V6-3.5L (2007)
11. Remove the reservoir mounting bolt (A).
12. Disconnect the clutch line (B) from the bracket (C).
13. Remove the clutch line from the clamps (D).
14. Remove the clutch master cylinder (E).
15. Disconnect the reservoir hose (A), then remove the retaining clip (B), and the clutch line (C) from the clutch master cylinder (D). Plug or warp the
end of the reservoir hose and clutch line with a shop towel to prevent brake fluid from coming out.
16. Remove the O-ring (E) and clutch master cylinder seal (F) from the clutch master cylinder.
17. Install the O-ring (A) and clutch master cylinder seal (B) to the clutch master cylinder (C).
