TL V6-3.5L (2007)
Axle Shaft Assembly: Removal and Replacement
Intermediate Shaft Removal
Intermediate Shaft Removal
1. Drain the transmission fluid, than reinstall the drain plug with a new washer.
2. Remove the right driveshaft.
3. Remove the rear WU-TWC bracket (A) and heat shield (B).
4. Remove the flange bolt (A) and two dowel bolts (B).
5. Remove the intermediate shaft (A) from the differential. Hold the intermediate shaft horizontally until it is clear of the differential to prevent
damaging the differential oil seal (B).