TL V6-3.5L (2007)
Axle Shaft Assembly: Removal and Replacement
Intermediate Shaft Installation
Intermediate Shaft Installation
1. Install a new set ring (A).
2. Clean the areas where the intermediate shaft contacts the differential thoroughly with solvent or brake cleaner, and dry with compressed air.
NOTE: Do not wash the rubber parts with solvent.
3. Insert the intermediate shaft assembly (A) into the differential until the set ring locks in the groove.
NOTE: Insert the intermediate shaft horizontally to prevent damaging the differential oil seal (B).
4. Install the flange bolt (A) and two dowel bolts (B).
